User Manual Q&AAnswer
Apr 09, 2025 - 01:51 AM
To clean the BUNN MCU Single Cup Multi-Use Coffee Maker, follow these steps:
1. Rinse the Drawer(s) after each use. The Drawers, Drip Tray, and Drip Tray Cover are top rack dishwasher safe.
2. Occasionally wipe the outside of the Coffee Maker with a mild, non-citrus dish soap and a damp cloth.
3. Clean the Coffee Maker at least every 3 months to remove mineral deposits. Fill the Pour-in Bowl with 14 oz. of white vinegar and close the Spin Lid. Place an empty cup (larger than 14 oz.) on the base and push the Brew Button to cycle vinegar through the Coffee Maker. Run three or more additional 14 oz. cycles of water through the Coffee Maker to flush out the remaining vinegar.
4. To clean the Sprayhead, unplug the Coffee Maker and allow it to cool. Remove the Drawer and rotate the Sprayhead clockwise to remove it. Clean the Sprayhead and Seal with mild detergent and rinse thoroughly. Use a toothpick to clear any debris from the Sprayhead holes. Reassemble the Sprayhead by rotating it counter-clockwise until finger tight.
5. To clean the Water Probes, unplug the Coffee Maker and allow it to cool. Remove the 2 screws in the Pour-In Bowl lid and lift off the top of the Pour-In Bowl. Gently scrub the Water Probes and surrounding area with a textured sponge or toothbrush to remove deposits. Replace the top of the Pour-In Bowl and re-install the screws.
6. For any other maintenance or repairs, contact BUNN customer service at 1-800-352-2866 or visit retail.bunn.com.
Note: Do not disassemble the Coffee Maker as there are no user-serviceable parts inside.
Add New Comment