User Manual Q&AAnswer
Apr 09, 2025 - 01:35 AM
To connect the yeedi mop station Robot Vacuum to your home Wi-Fi network, please follow these steps:
1. Make sure your mobile phone is connected to a Wi-Fi network and the 2.4GHz band wireless signal is enabled on your router.
2. Turn on the Robot by switching the power switch to the ON position. The Wi-Fi indicator light on the Robot should start slowly flashing.
3. Download and install the yeedi App on your mobile phone from the App Store or Google Play Store.
4. Open the yeedi App and create an account if you don't have one already. Log in to your account.
5. Tap on the "+" icon in the top right corner of the App to add a new device.
6. Select "Robot Vacuum" from the list of available devices.
7. Follow the on-screen instructions to put the Robot in Wi-Fi pairing mode. This usually involves pressing and holding the RESET button on the Robot for 3 seconds until it plays a musical tune and the Wi-Fi indicator light starts flashing rapidly.
8. On the App, select your home Wi-Fi network from the list of available networks and enter the correct Wi-Fi username and password.
9. Wait for the App to connect the Robot to your Wi-Fi network. This may take a few moments.
10. Once the Robot is successfully connected to your Wi-Fi network, the Wi-Fi indicator light on the Robot will turn solid.
Congratulations! Your yeedi mop station Robot Vacuum is now connected to your home Wi-Fi network. You can control and monitor the Robot using the yeedi App on your mobile phone.
Add New Comment