User Manual Q&AAnswer
Apr 09, 2025 - 01:31 AM
To check the battery level of the power pack, follow these steps:
1. Make sure the power pack is turned off.
2. Press the DC button (K1) on the power pack.
3. The LCD display will show the remaining battery capacity and battery percentage (I / J).
4. The power pack will shut down if you press the DC button (K1) again.
To recharge the power pack, you have several options:
1. CD Wall Charger: Connect the mains charger to the charging input port (P1) of the power pack.
2. Solar controller and In-Vehicle charger: Connect the DC adapter cable to the solar controller and plug it into a 12V socket in your vehicle.
3. Solar panel: Connect your 12V or 24V solar array to the solar controller via the MC4 connectors.
4. DC adapter cable: Connect a charging source to the charging input port (P1) of the power pack.
While charging, the LCD display will provide charging information, including the current input power (C) and the remaining time until the power pack is fully recharged (D). Once the battery is fully charged, the battery percentage will display 100% and the LCD will turn off after 10 seconds.
Note: It is recommended to fully recharge the power pack after each use and to store it in a fully charged state within a dry and ventilated space.
Add New Comment