User Manual Q&AAnswer
Apr 09, 2025 - 01:28 AM
To assemble the Einhell TE-VE 550/2 A Vacuum Extraction Machine, please follow these steps:
1. Start by fitting the wheels on both sides of the chassis using the axle xxxx and washer. Tighten the axle screws and fasten the wheel caps to the wheels.
2. Loosely xxxx the side plates and the strengthening plate to the machine. This will simplify the assembly work and prevent tension in the chassis.
3. Use the long lock bolts and nuts to fasten the two side plates loosely to the chassis. Check that the orientation is correct.
4. Place the strengthening plate between the side plates and use the short lock bolts and nuts to fasten it loosely.
5. Undo the two nuts on both sides of the plastic housing. Then guide the plastic housing over the side plates, insert the screws at the plastic housing through the holes into the side plates, and use the nuts to fasten the plastic housing to the side plates.
6. Now tighten all the loose xxxx connections.
Please refer to the manual for detailed illustrations and instructions on assembling the Einhell TE-VE 550/2 A Vacuum Extraction Machine.
Add New Comment