User Manual Q&AAnswer
Apr 09, 2025 - 01:21 AM
To set up the DOMETIC Rally Pro 200 Awning Tent, follow these steps:
1. Choose a flat site that is protected from wind and clear it of sharp stones and debris.
2. Lay down a ground sheet or footprint to protect the awning tent.
3. Unpack the awning tent and separate the different components.
4. Push the poles into the sleeves from front to rear.
5. Stand the awning tent upright and check the corner pegs, re-peg if necessary.
6. Peg the guy lines in line with the seam they start from.
7. If available, attach the storm straps.
8. Check the guy lines from time to time to ensure adequate tension, adjusting if necessary.
For a more detailed step-by-step guide with illustrations, please refer to figures 1 to 24 in the instruction manual.
Note: It is recommended to carry out a test setup before using the awning tent for the first time to familiarize yourself with the product and ensure the scope of delivery is complete. Additionally, special pegs may be required for certain types of ground, so it's advisable to consult your dealer for suitable pegs.
Please refer to the instruction manual for further information and safety guidelines.
Add New Comment