User Manual Q&AAnswer
Apr 09, 2025 - 01:12 AM
To install the Tooq LP1071T-B Wall Bracket for TV Monitor, please follow the steps below:
1. Ensure that you have all the necessary tools for installation, including a drill, screwdriver, level, and measuring tape.
2. Start by determining the desired mounting location on the wall. Ensure that the wall can support the weight of both the bracket and the TV monitor.
3. Use a measuring tape to mark the desired height and position for the bracket on the wall. Use a level to ensure that the markings are straight and aligned.
4. Once the markings are made, use a drill to create holes in the wall at the marked positions. Ensure that the holes are deep enough to securely hold the wall plugs.
5. Insert the wall plugs into the drilled holes. These will provide additional support for the bracket.
6. Align the bracket with the wall plugs and use a screwdriver to secure the bracket to the wall using the provided screws. Make sure the bracket is level and securely attached.
7. Next, locate the VESA mounting holes on the back of your TV monitor. These holes should match one of the VESA patterns listed in the specifications (e.g., 75x75, 100x100, etc.).
8. Attach the included VESA mounting screws to the VESA holes on the back of the TV monitor. Make sure they are tightened securely.
9. Finally, carefully lift the TV monitor and align the VESA mounting holes with the bracket's VESA plate. Once aligned, slide the TV monitor downwards until it locks into place on the bracket.
10. Double-check that the TV monitor is securely attached to the bracket and ensure that it is level. Make any necessary adjustments to the tilt angle (-8°) if desired.
Please note that this answer is a general guide. For more specific instructions and illustrations, it is recommended to refer to the user manual provided with the Tooq LP1071T-B Wall Bracket for TV Monitor.
Add New Comment