User Manual Q&AAnswer
Apr 09, 2025 - 01:11 AM
To set the timer on the TRISTAR KA-5914 Convector Heater, follow these steps:
1. Rotate the outer ring of the timer in a clockwise direction until the current time is lined up with the arrow.
2. Make sure the slide switch on the timer is in the "O" position during the setting procedure.
3. Pull out the segments for the desired time zones you want the heater to run.
- Each segment represents 15 minutes of time.
- For example, if you want the heater to run for 1 hour, you would pull out 4 segments.
4. Note that the heater will come on in the selected mode, so make sure the thermostat is set high enough to start the heater in the selected time zone.
Please refer to the instruction manual for more details and illustrations on setting the timer.
Add New Comment