User Manual Q&AAnswer
Apr 09, 2025 - 01:04 AM
Sure! Here are the step-by-step installation instructions for the BRAUN 5500 Lumens 4 Ft LED Linkable Shop Light, as provided in the owner's manual:
1. Select a suitable location for hanging the Shop Light. It must be hung from a joist or similar sturdy mounting location able to support the weight of the fixture. Do not install the Shop Light into drywall.
2. Verify that the installation surface has no hidden utility lines before drilling or driving screws.
3. Mark the two spots where the mounting holes will be drilled in the installation surface.
4. Drill holes at the marked locations. Install 1/4" diameter hardware at least 1" long (sold separately) to hang the Shop Light. The hardware must have a hook to attach the Supporting Chains.
5. Attach one end of each of the two Supporting Chains to the S-hooks on the light fixture.
6. Hang the fixture by attaching the free ends of the two Supporting Chains to the previously installed mounting hardware. Adjust the length of the chains until the fixture is level. Note: The Shop Light must be hung at least three inches from the installation surface.
7. Attach an additional light to the Outlet. You can connect up to eight of these lights.
8. Use the included cable ties to secure the Power Cord to one of the Supporting Chains.
That's it! Once the Shop Light is properly installed, you can plug it into a grounded, 120VAC electrical outlet and use the On/Off Pull Chain to turn it on and off. Remember not to pull on the On/Off Pull Chain too hard or at an angle to prevent the light from falling.
Please refer to the owner's manual for additional safety information and maintenance procedures.
Add New Comment