User Manual Q&AAnswer
Apr 09, 2025 - 12:44 AM
The Anern ISGL08 Solar Light With Remote Control can be installed in two ways: on a wall or on a pole. Here are the steps to install the light:
1. Wall Installation:
a. Choose a suitable location on the wall where there is ample sunlight.
b. Use the provided screws and anchors to secure the mounting bracket to the wall.
c. Attach the solar light to the mounting bracket using the provided screws.
d. Adjust the angle of the light to ensure maximum exposure to sunlight.
2. Pole Installation:
a. Choose a suitable location for the pole where there is ample sunlight.
b. Dig a hole in the ground and insert the pole into the hole.
c. Secure the pole in place using concrete or other suitable materials.
d. Attach the solar light to the top of the pole using the provided screws.
e. Adjust the angle of the light to ensure maximum exposure to sunlight.
For more detailed instructions and illustrations, please refer to the Anern ISGL08 Solar Light With Remote Control User Manual (Manual No: 02, Date: 2018.01).
Note: It is recommended to consult a professional if you are unsure about the installation process or if you need assistance with wiring or electrical connections.
Add New Comment