User Manual Q&AAnswer
Apr 09, 2025 - 12:37 AM
To set the time on your TW Steel OS10 Miyota Movement watch, follow these steps:
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set the hour and minute hands to the desired time.
3. Once the time is set, push the crown back to the normal position.
To set the date on your watch, follow these steps:
1. Pull the crown out to the 1st click position.
2. Turn the crown counter-clockwise to set the date.
3. After setting the date, push the crown back to the normal position.
Note: If you set the date between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
For using the chronograph function on your watch, follow these steps:
1. The chronograph can be started and stopped by pressing button "A".
2. Press button "B" to reset the chronograph. This will return the chronograph second hand, minute hand, and hour hand to the zero positions.
To reset the chronograph if it does not return to the zero position or after replacing the battery, follow these steps:
1. Pull the crown out to the 2nd click position.
2. Press button "A" to set the chronograph second hand to the zero position.
3. Press button "B" once to set the chronograph 1/20 second hand to the zero position.
4. Once the hands have been zeroed, return the crown to the normal position.
Please note that if the crown is not pressed in properly, the watch is no longer waterproof and the movement can be seriously damaged.
Add New Comment