User Manual Q&AAnswer
Apr 09, 2025 - 12:36 AM
To assemble the ROCKLER AM/FM Stereo Wireless Speaker Kit, follow these steps:
1. Determine where you want the speakers and the control unit to be and mark the locations for the holes.
2. Cut a 2% x 1" diameter pill-shaped opening for the control unit using a coping or scroll saw, or a drill with a Forstner bit or hole saw.
3. Cut two 24" diameter holes for mounting the left and right speaker units using a coping or scroll saw, or a drill with a Forstner bit or hole saw.
4. Test fit the left and right speaker units into their respective mounting holes and secure them in place with epoxy if desired.
5. Connect the wires from the left speaker unit to the white port on the back of the control unit.
6. Connect the wires from the right speaker unit and attached battery to the blue and red ports on the back of the control unit.
7. Attach the AM and FM antenna wires to the control unit and secure them inside the enclosure using the adhesive tape.
8. Press fit or epoxy the control unit into the mounting hole.
9. Charge the speaker by plugging the included USB cord into the micro-USB port on the control unit and a power source.
10. Once the battery is charged, disconnect the USB cord and enable Bluetooth connectivity on your device.
11. Turn on the unit by pressing and holding the I button on the control unit for three seconds.
12. Select "My BT Speaker3" on your device and wait for the connection to be established.
13. The blue LED on the control unit will light up, the display will show "BLUE," and you will hear a tone indicating a successful connection.
Please refer to the ROCKLER AM/FM Stereo Wireless Speaker Kit instructions for more detailed information and illustrations.
Add New Comment