How do I install the resideo PROSIXCT-EU ProSeries Door/Window Sensor? (resideo PROSIXCT-EU ProSeries Door/Window Sensor User Guide)

Answer

manuals.plus

Apr 09, 2025 - 12:21 AM


To install the resideo PROSIXCT-EU ProSeries Door/Window Sensor, please follow the steps below:

1. Begin by scanning the QR code provided on the Quick Guide or access the Installation Instructions for more detailed information.

2. Ensure that you have the necessary tools and equipment for installation, including a screwdriver and any mounting hardware that may be required.

3. Choose a suitable location for the sensor on your door or window. It is recommended to place the sensor on the moving part of the door or window, such as the door frame or the window frame.

4. Remove the sensor cover by sliding it off or following the instructions provided in the Installation Instructions.

5. Install the sensor using the appropriate mounting method. This may involve using screws or adhesive tape, depending on your preference and the surface you are mounting it on.

6. Once the sensor is securely mounted, replace the sensor cover.

7. Test the sensor by opening and closing the door or window. Ensure that the sensor is properly detecting the movement and transmitting the signal to the connected system.

8. If necessary, refer to the User Guide for instructions on how to connect the sensor to your specific system or control panel.

For further assistance or more detailed instructions, please refer to the resideo PROSIXCT-EU ProSeries Door/Window Sensor User Guide or contact the manufacturer's customer support.