User Manual Q&AAnswer
Apr 09, 2025 - 12:20 AM
To install the QAZQA 105183 Charlois luminaire, please follow the instructions provided in the manual carefully. Here is a step-by-step guide:
1. Before starting the installation, ensure that the electrical supply is switched off. It is recommended to switch off the power at the distribution box.
2. The installation of the luminaire should be carried out by authorized and qualified technicians who are familiar with the regulations for electrical installation.
3. Take into account the minimal separation distance from other objects and ensure that there is enough room around the fitting for proper installation.
4. Exterior lighting should not be installed during rain or when moisture is present.
5. When connecting wires, pay attention to the symbols provided in the manual. L stands for Live, N stands for Neutral, and E stands for Earth.
6. Clamping screws in electrical connections must be adequately tightened, especially for 12V low voltage conductors.
7. If you need to replace a halogen lamp, make sure to wait for it to cool down for a minimum of 5 minutes before handling it.
8. During maintenance, ensure that no moisture comes into contact with any areas of the terminal connections or voltage control parts.
9. Clean the luminaire with a clean, dry cloth or brush. Do not use solvents or abrasives, and avoid dampness on all electrical components.
10. It is important to consult a professional if you have any doubts or if there are specific local installation requirements. Some countries may require lighting to be installed only by registered installers.
Remember to always refer to the instruction manual provided with the product for detailed and accurate installation instructions.
Add New Comment