User Manual Q&AAnswer
Apr 09, 2025 - 12:04 AM
To install the Mode-AL BT8700 Premium Floor to Wall Single Screen US Stand, please follow these steps:
1. Attach Mounting Bracket to Column:
- Insert 4 x item C2 into item Cl and attach item C3. xxxx two full turns to leave item C3 at the end of item C2.
- Slide item Cl down the front slots of item A 1 to the correct height and tighten item C2.
2. Optional - Fix Rear Cover to Column:
- Place item A2 into the back of item A 1.
- Use items AS & A6 at the top and bottom of the column slot to secure the rear cover.
3. Attach Wall Plate to Column:
- Fix item 81 to the top of item A 7 using item 83.
4. Fix Floor Plate to Floor:
- Fix item 82 to the floor (fixings not included).
- Note: Fixing points are 60mm away from the wall.
5. Mark Wall Fixing Holes:
- Using the guide pins, place item A 7 onto item 82. Mark the 4 fixing holes from item 87 onto the wall.
6. Drill Holes and Insert Wall Plugs:
- Remove item A 1 and drill the marked holes.
- Insert 4 x item 86 (Not required for stud/wood walls).
7. Hook Rail onto Mounting Bracket:
- Insert 4 x item C4 into item 07 (2 in the top channel, 2 in the bottom channel). xxxx 2 x item CS into item C4 in the top channel, allowing at least a 6mm gap so the rail can be hooked onto item Cl.
- Hook item 07 onto item Fl and fix it in place with item CS.
- Attach item 02 to the ends of item 0 1.
8. Fix Column to Wall:
- Place item A 1 onto item 82 and fix item 87 to the wall using items 84 & 85.
9. Attach Interface Arms to Screen:
- Fix item E7 to the rear of the screen using items E3 - E7 5.
- Note: Ensure the arms are facing the correct way round and the same holes are used on both arms.
10. Hook Screen onto Rail:
- Use items El to hook the screen onto item 01.
11. Level Screen and Lock onto Rail:
- Optional: If necessary, adjust the height adjustment screws on top of item El to level the screen.
- Tighten the safety screws on the bottom of item HI securing the screen to item D1.
12. Attach Strips:
- Insert item Al into the front and back of item A 1.
- Note: Item Al may have to be cut down to size to fit into the front of item A 1.
Please refer to the Mode-AL BT8700 Premium Floor to Wall Single Screen US Stand Installation Guide for more detailed instructions and illustrations.
Add New Comment