User Manual Q&AAnswer
Apr 08, 2025 - 11:09 PM
To install the artsound MDC6 Voice Coil In Wall Loudspeakers, please follow the steps below:
1. Choose the desired location for the speakers on the wall. Ensure that the wall is suitable for installation and can support the weight of the speakers.
2. Use the provided template to mark the cut-out dimensions on the wall. The cut-out diameter is 125mm.
3. Carefully cut the marked hole on the wall using appropriate tools, ensuring a clean and precise cut.
4. Connect the speaker wires to the terminals on the back of the speakers. Ensure proper polarity (positive to positive, negative to negative) for each speaker.
5. Gently push the speakers into the cut-out hole, making sure they are securely fitted.
6. Once the speakers are in place, use the screws or clamps provided to secure them to the wall.
7. Connect the other end of the speaker wires to your audio amplifier or receiver, following the appropriate connections.
8. Power on your audio system and test the speakers to ensure they are functioning properly.
Please note that these are general installation instructions. For more detailed instructions and safety precautions, we recommend referring to the artsound MDC6 Voice Coil In Wall Loudspeakers Instruction Manual provided with your purchase.
Add New Comment