User Manual Q&AAnswer
Apr 08, 2025 - 11:04 PM
To install the artsound MDC64 6.5 Waterproof Speakers, please follow these steps:
1. Ensure that you have the necessary tools required for installation.
2. Open the package and check the contents to make sure everything is included.
3. Choose the desired location for installation. Keep in mind that these speakers are waterproof and frost-free, so they can be installed in outdoor or indoor environments.
4. Use the provided dimensions and cut-out (Ø) measurement to mark the spot where the speakers will be installed.
5. Cut the hole according to the marked dimensions.
6. Connect the speaker wires to the speakers. Ensure that the polarity is correct (positive to positive, negative to negative).
7. Place the speakers into the cut-out hole and secure them using the appropriate mounting method.
8. Connect the other end of the speaker wires to your audio source or amplifier.
9. Test the speakers to ensure they are working properly.
If you encounter any difficulties during the installation process, please consult the troubleshooting section of the or contact your authorized dealer for assistance.
Add New Comment