User Manual Q&AAnswer
Apr 08, 2025 - 10:52 PM
To change the output signal of the ZIP SEE892 camera, you can use the dip switches located on the fly-lead of the camera. By default, the camera is set to HD-TVI. However, you can change the output to AHD, CVI, or CVBS if required. The dip switch configuration can be found in the instruction manual.
To change the output signal:
1. Locate the dip switches on the fly-lead of the camera.
2. Refer to the dip switch configuration in the manual to determine the desired output signal.
3. Use a small tool, such as a screwdriver, to adjust the dip switches according to the desired output signal.
4. Once the dip switches are set, the camera will output the selected signal (AHD, CVI, or CVBS) instead of the default HD-TVI.
Please note that changing the output signal using the dip switches overrides the output mode setting in the DVR menu.
Add New Comment