User Manual Q&AAnswer
Apr 08, 2025 - 10:35 PM
To connect the Light-Display-Module to the Light-Interface (LI-LPT or LI-LAN) or the Light-DEC-Basic-Module, you will need to use the 10-poles pin-plug-bar. Make sure that the pin bar is not inserted in an offset position to the socket bar. The modules are correctly inserted when the PC boards are flashed at the top and at the bottom. The pictures at the rear side of the instruction manual show the correct position of the modules. It is also possible to connect the module via the "Kabel L@N" or the screened "Kabel Patch" (from Light-Power Version 1.2 and Light-Display Version 1.7). Please refer to the instruction manual for more details and illustrations.
Note: The Light-Power-Module and Light-Display-Module do not need to be connected directly to each other.
Add New Comment