User Manual Q&AAnswer
Apr 08, 2025 - 10:33 PM
To connect the Service-Module GBS-Service to the Master-Module GBS-Master or the KeyCommander, please follow these steps:
1. Before starting the installation, make sure to switch off the drive voltage by pushing the stop button or disconnecting the main supply.
2. Connect the 15-pole pin-plug of the Service-Module GBS-Service to the 15-pole socket-plug of the Master-Module GBS-Master or the KeyCommander.
3. Ensure that there is no offset of the pin contact strip to the correct socket connection. Make sure the pins are aligned properly.
Please refer to the provided pictures in the manual (Picture 1: The Service-Module GBS-Service connected to the Master-Module GBS-Master via the 15-pole pin plug, Picture 2: The Service Module GBS-Service connected to the KeyCommander KeyCom via the 15-pole pin plug) for visual guidance.
It is important to note that the Service-Module GBS-Service can only operate together with a Master-Module GBS-Master or a KeyCommander, as it relies on the operating voltage and data from those modules. The further application of the module will be explained within the operating instruction of the Master-Module or the KeyCommander.
If you have any further questions or need additional assistance, please refer to the detailed operating instructions provided in the manual or contact Littfinski DatenTechnik (LDT) directly.
Add New Comment