User Manual Q&AAnswer
Apr 08, 2025 - 10:29 PM
The NiteDevil IPCND714 24C Camera can be powered in two ways.
Option 1: You can power the camera using a 12V DC power supply. Connect the power supply to the camera's 2.1mm DC Socket. Please note that the camera is polarity sensitive, so make sure to correctly connect the power supply.
Option 2: You can also power the camera using a PoE (Power over Ethernet) switch. Simply plug the camera directly into the PoE switch using an Ethernet CAT5/5e/6 cable. The camera should automatically become visible after being connected for approximately 1 minute.
Please refer to the instruction manual for more detailed information on power connections and setup options.
Add New Comment