User Manual Q&AAnswer
Apr 08, 2025 - 10:11 PM
To connect the Littfinski DatenTechnik 000101 Connection Cable 2m to the s88-feedback bus and the light controls Light@Night and Light-DEC, please follow the instructions provided in the user manual.
For connecting the cable to the s88-feedback bus:
1. If you are using the cable to connect the feedback module RM-88-N, RM-88-N-O, or RM-GB-8-N, remove the pin-pin plug from one end of the cable.
2. Attach one socket of the cable to the 6-pole pin bar of the feedback module, ensuring that the single white wire corresponds to the white marking on the pin bar.
3. Attach the second pin-socket of the cable directly to the command station, interface, or another feedback module within the feedback line.
For connecting the cable to Märklin or Viessmann feedback modules:
1. Remove the pin-plug from one end of the cable.
2. Insert the pin-socket connectors of the cable into the feedback modules, ensuring that the cable is directed towards the bottom and the white single wire corresponds to the white marking on the modules.
For connecting the cable to the Light-Display and Light-Power Module of Light@Night and Light-DEC:
1. Insert the pin-plug connector of the cable into the 10-pole socket bar of the previous Light-Display or Light-Power Module, aligning the white single wire with the white marking on the module.
2. Connect the other end of the cable to the 10-pole pin plug of the next module, ensuring that the white single wire corresponds to the white marking on the module.
Please refer to the user manual for visual diagrams and further details on connecting the Littfinski DatenTechnik 000101 Connection Cable 2m to the s88-feedback bus and the light controls Light@Night and Light-DEC.
Add New Comment