User Manual Q&AAnswer
Apr 08, 2025 - 09:52 PM
Cleaning the fri-jado CC-Hot Custom Counter is an important part of maintenance to ensure proper functioning and hygiene. Here are the steps to clean the unit:
1. Daily Cleaning:
- Clean the outside of the unit with a small amount of hot water and a mild cleanser using a soft brush or sponge.
- Treat all cleaned surfaces with a suitable antibacterial agent.
- Rub dry with a soft cloth or a paper towel.
2. Weekly Cleaning:
- Open the front glass on the customer side, one at a time.
- Remove the side glass and sliding doors on the operator side.
- Clean the deck plates, air inlet grid, air outlet grid, drain, and inner tray.
- Ensure all parts are placed back in the correct position/orientation.
3. Glass Panes:
- Clean the glass panes weekly using a suitable glass cleaner and a soft cloth.
4. Bottom Air Guides:
- Clean the bottom air guides weekly to remove any debris or dirt.
It is important to note that a water hose should never be used for cleaning, as water can seep into the unit through the ventilation holes. Additionally, the mains power must be switched off during cleaning or maintenance and when replacing parts.
For more detailed instructions and safety precautions, please refer to the fri-jado CC-Hot Custom Counter User Manual.
Add New Comment