User Manual Q&AAnswer
Apr 08, 2025 - 09:49 PM
To set up the , follow these steps:
1. Choose a flat site that is protected from wind and clear it of sharp stones and debris.
2. Lay down a groundsheet or footprint to protect the tent.
3. Unpack the tent and separate the different components.
4. Inflate the air poles using the supplied hand pump. Only inflate the air poles into the green zone of the pressure gauge (9 psi/0.62 bar).
5. Drive the pegs at a 45° angle away from the tent into the ground.
6. Peg each guy line in-line with the seam it starts from.
7. Check the corner pegs and re-peg if necessary to ensure the groundsheet is taut and in a rectangular shape.
8. Attach any accessories, such as the HUB Sleeping Annexe or PVC/Mesh Window/Door Panels, if desired.
9. Check the guy lines from time to time to ensure adequate tension and adjust if necessary.
10. If available, attach the storm straps for added stability.
For more detailed instructions and illustrations, please refer to the Dometic HUB Inflatable Activity Shelter Instruction Manual.
Add New Comment