User Manual Q&AAnswer
Apr 08, 2025 - 09:47 PM
To connect and configure the LANCOM XS-5110F switch, follow these steps:
1. Configuration Interfaces: The switch has two configuration interfaces. Connect the RJ-45 interface (➀) to the serial interface of the device you want to use for configuration and monitoring. Alternatively, you can use the micro USB interface (➁) with the included micro USB cable.
2. USB Interface: The switch has a USB interface where you can connect a USB stick. This interface can be used to store general configuration scripts or debug data. You can also use it to upload new firmware.
3. SFP+ Interfaces: The switch has SFP+ interfaces 1G/10G. Insert suitable LANCOM SFP+ modules into the SFP+ interfaces 1 to 8. Make sure to choose cables that are compatible with the SFP+ modules and connect them as described in the SFP modules mounting instructions.
4. TP Ethernet Interfaces: The switch has TP Ethernet interfaces 1G/2.5G/5G/10G (combo ports) 1. Connect interfaces 9 to 10 via high-quality CAT.6 Ethernet cables to your PC or a LAN switch.
Setting up the device:
- Ensure that the mains plug of the device is freely accessible.
- Do not place any objects on top of the device or stack multiple devices.
- Keep the ventilation slots on the side of the device clear of obstruction.
- Mount the device into a 19" unit in a server cabinet using the provided screws and mounting brackets.
- Note that support for third-party accessories (SFP and DAC) is not provided.
Before initial startup, refer to the enclosed installation guide for information regarding the intended use. Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
For more detailed information and instructions, please refer to the LANCOM XS-5110F 10-port 10 Gigabit Ethernet Switch User Guide.
Add New Comment