User Manual Q&AAnswer
Apr 08, 2025 - 09:46 PM
To use the METER 18299 TEROS Verification Clip to verify the function and accuracy of your TEROS soil moisture sensor, please follow these steps:
1. Confirm that all the components of the verification clip are intact. The verification clip is designed to help verify the proper function and accuracy of TEROS 10, 11, and 12 soil moisture sensors before installation.
2. Make sure you have a data acquisition system and the appropriate software, such as the ZL6 and ZENTRA Utility or ZENTRA Utility Mobile. It is recommended to use the latest versions of the software and firmware for the computer or mobile device, products, and sensors. Check the software's Help menu for updates.
3. Handle the verification clip with care, as the sensor needle points are extremely sharp and can puncture the skin. Take necessary precautions to avoid personal injury.
4. Slide the verification clip onto the two prongs farthest away from the sensor cable, with the arrow pointing toward the sensor. Ensure that the clip is securely attached to the sensor.
5. The verification clip should rest snugly against the sensor body. Double-check the placement to ensure it is correct.
6. Plug the TEROS sensor into the data logger and use the SCAN function in the software. This will initiate the verification process.
7. The software should display the readings from the sensor. Verify that the readings fall within the appropriate ranges for accurate soil moisture measurement. Consult the sensor user manual for the specific ranges.
If you encounter any issues or have further questions, you can reach out to METER's support team for assistance. They have experts who can help you troubleshoot and provide solutions.
Support Contact Information:
- North America:
Email: support.environment@metergroup.com
Phone: +1.509.332.5600
- Europe:
Email: support.europe@metergroup.com
Phone: +49 89 12 66 52 0
Please note that the provided contact information is subject to change, so it's always a good idea to check the METER website for the most up-to-date support details.
Add New Comment