User Manual Q&AAnswer
Apr 08, 2025 - 09:11 PM
To install the SUBARU H4510VA040 WRX Fog Lamp Kit, please follow the installation instructions provided in the manual. Here is a step-by-step guide:
1. Start by gathering all the necessary components and tools mentioned in the manual.
2. Make sure to read all the instructions thoroughly before beginning the installation process.
3. Take caution not to damage any vehicle components when removing or installing them.
4. Route the wiring in a way that it does not come into contact with any sharp edges.
5. Begin the installation by removing the front bumper cover according to the instructions provided in the manual.
6. Install the fog lamp brackets onto the bumper beam using the provided hardware.
7. Attach the fog lamp assemblies to the brackets using the provided screws.
8. Connect the fog lamp harness to the vehicle's wiring harness by following the instructions in the manual.
9. Secure the fog lamp harness using the provided clips or ties.
10. Reinstall the front bumper cover, making sure it is properly aligned and secured.
11. Connect the fog lamp switch to the vehicle's interior wiring following the instructions provided.
12. Test the fog lamps to ensure they are functioning correctly.
13. If necessary, adjust the aim of the fog lamps by following the instructions in the manual.
14. Double-check all connections and ensure everything is properly secured.
15. Once you are satisfied with the installation, reassemble any other components that were removed.
16. It is recommended to have a Subaru dealer technician perform the lamp aiming in step 16 if you are uncomfortable doing it yourself.
Please note that this is a general overview of the installation process. For detailed instructions and diagrams, refer to the SUBARU H4510VA040 WRX Fog Lamp Kit Instruction Manual provided with the product.
Add New Comment