User Manual Q&AAnswer
Apr 08, 2025 - 09:02 PM
To install the battery in the Zetronix ARES zClock-6000 Desk Clock Hidden Wireless Camera, please follow these steps:
1. Ensure you have the 18650 battery with the negative electrode "-" facing towards the spring.
2. Connect the power supply and locate the side switch key on the device.
3. Press down on the side switch key to turn on the camera and clock device. You will hear a startup beep and the device will beep once every 10 seconds. Two beeps indicate that the network setup needs to be done.
4. Press and hold the reset button for about 5-10 seconds, while not releasing it. You will hear a camera prompt, indicating that the reset process has started. (Please avoid resetting the device when it is in the correct state.)
5. Remove the screen protector from the device.
Note: Make sure to remove the battery tab before turning on the camera and clock device.
For more detailed instructions, please refer to the Zetronix ARES zClock-6000 Desk Clock Hidden Wireless Camera User Guide.
Add New Comment