User Manual Q&AAnswer
Apr 08, 2025 - 12:35 PM
To set up the FLYCAM FLCM-FLN-MSTR-02 Flowline Master Professional Support for Camera, please follow these steps:
1. Join section-1 of the support bar to section-2 using the simple push-fit technique.
2. Remove the side knobs and join section-2 with section-3, then tighten the side knobs.
3. Tighten and adjust the buckles provided at the chest and waist to ensure a secure fit.
4. Loosen the xxxx of the hook and attach the camera to it. Tighten the xxxx to ensure a slip-free connection.
5. Use the Tension Adjustment xxxx to adjust the tension anti-clockwise according to the weight of your camera setup.
Note: It is important not to release the lever without removing the setup, as it may result in serious damage to the camera.
For further assistance or if you have any other questions or concerns, please refer to the instruction manual provided with the product or contact the manufacturer's customer support.
Add New Comment