User Manual Q&AAnswer
Apr 08, 2025 - 12:28 PM
To assemble the INVACARE NordBed Optimo Wide Nursing Bed, please follow the step-by-step instructions provided in the Mounting Instruction manual included in the box. Here is a general overview of the assembly process:
1. Unpack all the components from the box and ensure that all parts are included as listed in the manual.
2. Start by attaching the headboard and footboard to the bed frame. Align the holes on the headboard and footboard with the corresponding holes on the bed frame. Use the provided screws and tighten them securely.
3. Attach the side rails to the bed frame. Align the holes on the side rails with the corresponding holes on the bed frame. Use the provided screws and tighten them securely.
4. Install the mattress platform onto the bed frame. Place the platform onto the frame and align the holes. Insert the provided pins into the holes to secure the platform in place.
5. Connect the control box to the bed frame. Locate the control box and connect the cables to the designated ports on the bed frame. Ensure that the connections are secure.
6. Attach the control panel to the bed frame. Position the control panel in the desired location on the bed frame and use the provided screws to secure it in place.
7. Connect the power cord to the control box and plug it into a suitable power outlet.
8. Test the bed's functions by using the control panel. Familiarize yourself with the various buttons and functions described in the manual.
Please note that these are general instructions, and it is essential to refer to the specific Mounting Instruction manual included in the box for detailed and accurate assembly steps.
Add New Comment