User Manual Q&AAnswer
Apr 08, 2025 - 12:13 PM
To install the akasa A-M2HS03-BK GeckoCooler Active Cooling for M.2 NVMe PCIe and SATA Drives, follow these steps:
1. Start by preparing the components. The package should include a steel fan bracket, a Ø50 x 15mm fan, an aluminum heatsink, a 3-pin connector, an M.2 SSD thermal pad, a base, and a mounting xxxx .
2. Place the steel fan bracket on top of the M.2 SSD, aligning the xxxx holes with the mounting holes on the SSD.
3. Attach the Ø50 x 15mm fan to the steel fan bracket using the provided screws. Make sure the fan is securely attached.
4. Apply the M.2 SSD thermal pad to the aluminum heatsink. Ensure that the thermal pad covers the entire surface area of the heatsink.
5. Position the aluminum heatsink on top of the M.2 SSD, aligning the xxxx holes with the mounting holes on the steel fan bracket.
6. Securely fasten the aluminum heatsink to the steel fan bracket using the provided mounting xxxx .
7. Connect the 3-pin connector from the fan to the appropriate fan header on your motherboard.
8. Ensure that the akasa A-M2HS03-BK GeckoCooler is properly installed and secured.
The above steps should guide you through the installation process of the akasa A-M2HS03-BK GeckoCooler Active Cooling for M.2 NVMe PCIe and SATA Drives. For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Add New Comment