User Manual Q&AAnswer
Apr 08, 2025 - 12:12 PM
To install the BIXOLON SRP-350-352III Thermal Printer, please follow these steps:
1. Cable Connection:
- Turn off the printer and the host ECR (host computer).
- Plug the power cord into the adaptor and then plug the adaptor into the power connector of the printer.
- Check the interface type on the back of the printer (Serial, Parallel, USB, or Ethernet), and connect the interface connector cable.
- Plug the drawer kick-out cable into the drawer kick-out connector on the printer.
- Do not use an adapter that was not supplied with the printer.
2. Installing Paper Roll:
- Open the Cover-Open button to open the cover.
- Insert a new paper roll in the right direction.
- Pull out a small amount of paper and then close the cover.
- Note: Make sure to press the center of the cover to make the paper tightly close to the roller. Also, use recommended paper for optimum printing quality.
3. Self-Test:
- Check that the paper is properly loaded.
- While pressing the Feed button, turn the power off. Self-test begins.
- The printer will print the current state, ROM version, and DIP switch settings.
- Press the Feed button to continue printing. The printer will print printable character forms.
- The self-test mode will end automatically, and the printer will print "COMPLETED" to cut the paper.
- The printer will return to the normal state after the self-test mode ends.
For more detailed installation information, please refer to the user manual provided on the enclosed CD. The CD also includes drivers and utilities for the printer. If you have any further questions or need assistance, please refer to the BIXOLON website for contact information.
Add New Comment