User Manual Q&AAnswer
Apr 08, 2025 - 11:55 AM
To adjust the flame on the ETNA KGV Series Gas Hub, follow these steps:
1. While keeping the xxxx of the burner depressed, turn the xxxx to the left and light the burner with a match. The gas flame can now be smoothly adjusted from high to low.
2. Keep the control xxxx fully depressed for at least 5 seconds between high and low settings. This activates the thermocouple safety pilot.
3. If your gas hub has an electrical spark switch, press the control xxxx and turn it anti-clockwise to ignite the burner. The gas flame can then be adjusted from high to low.
4. If the burner fails to light after repeated attempts, check to ensure that the burner cap is properly positioned.
Please note that each burner on the ETNA KGV Series Gas Hub is fully adjustable between high and low settings. Always follow the safety instructions provided in the manual before using the device.
Add New Comment