User Manual Q&AAnswer
Apr 08, 2025 - 11:48 AM
To connect the battery to the APC BR1200SI Back UPS PRO, follow these steps:
1. Lay the UPS with the battery door facing up. The arrows on the unit will point to the locking tabs of the battery compartment.
2. Press the tabs downwards and pull the battery door away from the unit to access the battery modules.
3. Using the handles on both sides of the battery, lift the battery 30 degrees upward to expose the battery connector. Connect the red wire as shown in the manual.
4. Push the battery into the unit.
5. Replace the battery door.
Please refer to the "Connect the Battery" section in the user manual for visual instructions and additional details.
Note: It is important to ensure that the battery is connected properly to ensure the UPS functions correctly and provides backup power when needed.
Add New Comment