User Manual Q&AAnswer
Apr 08, 2025 - 11:41 AM
To install the JONSBO CR-1000PLUS Cooler Dual Fan on an Intel motherboard, please follow these steps:
1. Remove the fan before installing the heatsink.
2. Install the Intel bracket onto the motherboard.
3. Apply thermal paste to the CPU or remove the protection film if it is pre-applied.
4. Place the backplate at the rear of the motherboard as shown in the manual.
5. Adjust the slider on the backplate to the corresponding position for your motherboard socket.
6. Secure the cooler onto the motherboard using a screwdriver.
7. Connect the power cord of the cooler to the motherboard.
Please refer to the JONSBO CR-1000PLUS Cooler Dual Fan Instruction Manual for more detailed instructions and illustrations specific to your motherboard socket.
Add New Comment