User Manual Q&AAnswer
Apr 08, 2025 - 11:40 AM
To set up the Niceboy ORBIS Motion Smart Sensor, follow these steps:
1. Make sure you have the Niceboy ION app downloaded and the Niceboy ION ORBIS Bridge installed on your device.
2. Insert the battery (CR2 type) into the sensor unit.
3. Press and hold the reset button on the sensor for 5 seconds until the indicator light starts flashing rapidly.
4. There are two methods to add the device:
a. Open the Niceboy ION app, tap "Home," and then open Niceboy ION ORBIS Bridge. Click on "Zigbee devices list," then on "Add device," and finally on "Add new devices." The app will start searching for nearby devices. Once the device is found, it will appear on the screen. Click on the device and add it to your app.
b. Open the Niceboy ION app, tap the "+" icon in the top right corner to enter the "Add Device" page. Select "Sensors," then click on "Motion sensor" and choose the Zigbee gateway (Niceboy ION ORBIS Bridge). Confirm that you have inserted the batteries, reset the device, and the indicator light is blinking rapidly. The app will start searching for a new device. Once the device is found, add it to the app.
5. The new device will be visible in the Niceboy ION ORBIS Bridge and on the "Home" page of the app.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment