User Manual Q&AAnswer
Apr 08, 2025 - 11:15 AM
To connect your Lenco PIR-645 radio to a wireless network, follow these steps:
1. Turn on the radio and press the Mode button to select Internet Radio mode.
2. The display will show the "Setup Wizard" screen. Scroll the "-Vol+/OK/Tune" xxxx to select "YES" and press the xxxx to confirm.
3. The setup wizard will now scan for accessible wireless networks. When the scan is complete, a list of networks will be displayed.
4. Scroll the "-Vol+/OK/Tune" xxxx to select your wireless network from the list and press the xxxx to confirm.
5. If a password (WEP/WPA) is required, the radio will ask you to enter the password. Use the "-Vol+/OK/Tune" xxxx to cycle through the alphanumeric character list and press the xxxx to select each character. After entering the password, scroll to "OK" and press the xxxx to confirm.
6. The radio will now connect to the wireless network. Once connected, you can start using the Internet radio feature.
Note: If your network supports WPS (Wi-Fi Protected Setup), you can also choose to connect using the WPS method. Press the "-Vol+/OK/Tune" xxxx after selecting your network and choose the appropriate WPS option.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with your Lenco PIR-645 radio.
Add New Comment