User Manual Q&AAnswer
Apr 08, 2025 - 09:31 AM
To connect the RIDGID SeeSnake Compact2 camera system to a SeeSnake monitor, follow these steps:
1. Unwrap the system cable from the cable wraps.
2. Pull back the outer locking sleeve on the system cable connector.
3. Align the connector ridge and plastic guide pin with the socket on the SeeSnake monitor and push the connector straight in.
4. Tighten the outer locking sleeve to secure the connection.
It is important to only twist the outer locking sleeve and not bend or twist the connector to avoid damaging the pins. Make sure the connection is secure before powering on the system.
Add New Comment