User Manual Q&AAnswer
Apr 08, 2025 - 09:11 AM
To mount the pendant on a suspended ceiling using the Progress Lighting 8718 Alpha Trak Pendant Kit, please follow these steps:
1. Before starting the installation, make sure to turn off the electricity at the main circuit breaker panel to ensure safety.
2. Determine the desired location for the pendant on the suspended ceiling. Ensure that there is sufficient clearance and support for the pendant.
3. Locate the ceiling joists or support structure above the suspended ceiling. Use a stud finder or other appropriate tools to locate the joists.
4. Mark the desired location for the pendant on the suspended ceiling, taking into account any specific design or spacing requirements.
5. Install a suitable electrical box or mounting bracket on the suspended ceiling at the marked location. Ensure that the box or bracket is securely attached to the ceiling joists or support structure.
6. Follow the instructions provided with the Progress Lighting 8718 Alpha Trak Pendant Kit to assemble the pendant components. Make sure to follow the specific instructions for pendant assembly and wiring.
7. Once the pendant is assembled, carefully attach it to the electrical box or mounting bracket on the suspended ceiling. Follow the instructions provided with the pendant kit for proper attachment.
8. Connect the wiring of the pendant to the electrical supply according to the instructions provided with the pendant kit. Make sure to follow all electrical codes and regulations.
9. After the pendant is securely mounted and wired, restore the electricity by turning on the main circuit breaker panel.
10. Test the pendant to ensure it is functioning properly. If there are any issues or concerns, consult a qualified electrical contractor for assistance.
Please note that the above instructions are a general guideline. It is important to refer to the specific instructions provided in the Progress Lighting 8718 Alpha Trak Pendant Kit for accurate and detailed installation steps.
Add New Comment