User Manual Q&AAnswer
Apr 08, 2025 - 08:19 AM
To install the SeaGull Lighting HC-1573 Herrington 1-Light 10-in Black Outdoor Wall Light, please follow these steps:
1. Before starting the installation, make sure the electricity to the system you are working on is turned off. Either remove the fuse or set the circuit breaker to the off position.
2. Use only components from SeaGull Lighting to avoid voiding the warranty and creating potential safety hazards.
3. If you are unsure about the installation process, it is recommended to contact a qualified electrician for assistance.
4. No special tools are required for installing this fixture.
5. Follow the steps in the order given in the instruction manual.
6. Read the instructions carefully and save them for future reference.
7. Note that the glass of this fixture is handcrafted, and slight imperfections are part of its authenticity.
8. If you have a fixture made of solid brass, it is recommended to regularly apply a good quality non-abrasive car wax to all metal surfaces to maintain its appearance.
Before beginning the installation, carefully unpack the fixture and ensure that all parts are included. Take care not to misplace any screws or parts needed for installation.
For cleaning, use a soft cloth to wipe the fixture. Clean the glass with a mild soap, avoiding abrasive materials such as scouring pads, powders, steel wool, or abrasive paper.
If you need to order replacement parts in the future, keep this instruction sheet for reference and use the exact wording from the illustration when placing an order. Replacement parts can be ordered from the place of purchase.
Note that if the fixture is labeled for wet location and intended for outdoor use, it is important to provide a watertight seal between the fixture and the mounting surface. This can be achieved by using a silicone or similar caulking. This precaution helps reduce the risk of electrical shock.
Add New Comment