How do I install the GenStone Coffee Faux Stone Peaked Column Cap Siding? (GenStone Coffee Faux Stone Peaked Column Cap Siding User Guide)

Answer

manuals.plus

Apr 08, 2025 - 08:16 AM


To install the GenStone PPCC-LG23 Coffee Faux Stone Peaked Column Cap Siding, please follow the instructions provided in the GenStone Installation Guide. Here are the general steps:



1. Prepare the surface: Ensure that the surface where the siding will be installed is clean, dry, and free from any debris or loose materials.



2. Measure and cut: Measure the dimensions of the area where the siding will be installed and cut the panels accordingly using a saw or a utility knife.



3. Apply adhesive: Apply a high-quality construction adhesive to the back of each panel, ensuring even coverage.



4. Install the panels: Starting from the bottom, press the panels firmly onto the surface, aligning them properly. Use screws or nails to secure the panels in place, following the recommended spacing provided in the installation guide.



5. Seal the joints: Apply a bead of caulk to seal the joints between the panels, ensuring a watertight seal.



6. Finish and maintain: Once the installation is complete, use touch-up paint, caulking, and sealants as recommended by GenStone to ensure a finished look and long-lasting performance. Refer to the GenStone Use and Care document for maintenance instructions.



Please note that this is a general overview of the installation process. For detailed instructions and specific guidelines, it is essential to refer to the GenStone Installation Guide provided with the product.