User Manual Q&AAnswer
Apr 08, 2025 - 08:00 AM
Installation instructions for the OVE Decors 15LFM-WINC12-PWD Winchester Flush Mount Light can be found in the instruction manual provided with the product. Here is a step-by-step guide to help you with the installation process:
1. Start by turning off the power to the circuit you will be working on at the main electrical panel.
2. Remove the existing light fixture, if applicable, by unscrewing the mounting screws and disconnecting the wiring.
3. Carefully unpack the OVE Decors Winchester Flush Mount Light and ensure that all the necessary parts are included.
4. Attach the mounting bracket to the electrical box in the ceiling using the provided screws.
5. Connect the electrical wires from the ceiling to the corresponding wires on the light fixture. Match the black (hot) wire to the black wire, the white (neutral) wire to the white wire, and the green or bare copper (ground) wire to the green or bare copper wire.
6. Secure the wire connections with wire nuts and tuck them into the electrical box.
7. Align the holes on the light fixture with the screws on the mounting bracket and gently push the fixture up against the ceiling.
8. Insert and tighten the screws to secure the light fixture to the mounting bracket.
9. Turn on the power at the main electrical panel and test the light to ensure it is functioning properly.
Please note that these are general installation instructions, and it is always recommended to refer to the specific instruction manual provided with the product for detailed and accurate installation steps. If you have any further questions or need assistance, you can contact OVE Decors customer service at 1-866-839-2888 or email them at customerservice@ovedecors.com.
Add New Comment