User Manual Q&AAnswer
Apr 08, 2025 - 07:26 AM
Proper installation of the ASHLEY AGVF340N Single-Burner Vent Free Natural Gas Stove is crucial for safe and efficient operation. Here are the steps to follow for installation:
1. Ensure that the appliance is installed by a qualified installer, service agency, or gas supplier. Installation should comply with all local codes and regulations.
2. The stove should be placed in a well-ventilated area with adequate combustion and ventilation provisions. Refer to the section in the manual titled "Producing Adequate Air for Combustion and Ventilation" for specific guidelines.
3. The appliance is designed for use in an aftermarket, permanently located manufactured (mobile) home, where not prohibited by local codes. Make sure to check your local regulations before installation.
4. The stove is only intended for use with the type of gas indicated on the rating plate. Do not attempt to use any other type of gas.
5. Follow the installation instructions provided in the manual carefully. This includes connecting the gas supply line, ensuring proper clearance from combustible materials, and securing the stove to the floor or wall as required.
6. Once the installation is complete, perform a thorough leak test. Check all connections for leaks using a soapy water solution. If any leaks are detected, immediately shut off the gas supply and contact a qualified professional for assistance.
Remember, proper installation is essential for the safe and efficient operation of the ASHLEY AGVF340N Single-Burner Vent Free Natural Gas Stove. Always consult the user manual and seek professional help if needed.
Add New Comment