User Manual Q&AAnswer
Apr 08, 2025 - 06:47 AM
To charge the Laserliner 082425 ThermoControl Air thermometer, follow these steps:
1. Open the battery compartment located on the rear of the charger.
2. Insert the battery according to the symbols, making sure to pay attention to the polarity.
3. Press the button on the charger to check the battery charge level. If the LED lights up, the charging process is complete.
4. The measuring probe can be inserted into the charger for charging. The LED on the charger will indicate the battery charge level.
- If the LED is illuminated, the battery is fully charged.
- If the LED is flashing, the battery is currently charging.
- If the LED is not illuminated, the battery needs to be replaced.
Note: It is important to allow the probe to cool slowly before cleaning and storing. Do not use the probe at temperatures above 85°C.
Add New Comment