How do I install the KOHLER Coralais 1-Handle Valve Trim Kit? (kohler Coralais 1-Handle Valve Trim Kit User Guide)

Answer

manuals.plus

Apr 08, 2025 - 05:50 AM

To install the KOHLER K-TS15621-4 Coralais 1-Handle Valve Trim Kit, please follow the installation guide provided with the product. Here are the general steps:

1. Start by turning off the water supply to the shower or bathtub.
2. Remove the existing valve trim, if applicable.
3. Determine the type of valve you have and select the appropriate valve for installation. The K-TS15621-4 trim kit requires a valve to complete installation, which is sold separately. You can choose from the K-304 Series Rite-Temp® Valves, K-8304 Series Rite-Temp® Valve & Cartridge Kits, K-8300 Series Rite-Temp® Valve Body Rough-ins, K-8305 Series Rite-Temp® Cartridges, or the K-2971-KS 3/4" Pressure-balancing Valve.
4. Install the chosen valve according to its specific instructions.
5. Once the valve is installed, attach the faceplate with handle included in the trim kit. Follow the provided instructions for securing it properly.
6. Make sure the handle is aligned correctly for both on/off activation and temperature setting.
7. Turn on the water supply and test the functionality of the valve trim.
8. If needed, refer to the optional products/accessories section of the user guide for additional items that may enhance the installation, such as the K-10350 Deep rough-in kit or the K-10351 Test cap for K-8300 Series valve bodies.

Please note that it is important to read and follow the specific instructions provided in the installation guide for your particular valve and trim kit combination. If you have any further questions or concerns, you can contact KOHLER customer support at 1-800-4KOHLER (1-800-456-4537).