User Manual Q&AAnswer
Apr 08, 2025 - 05:48 AM
To use the Laserliner 083014 ActiveFinder Pro to locate electrical voltage, follow these steps:
1. Before using the device, make sure to read and understand the safety instructions provided in the instruction manual.
2. Insert the batteries into the battery compartment according to the polarity symbols indicated.
3. Turn on the device by pressing the ON/OFF button.
4. Position the detector tip in the area to be tested, such as a cable or socket.
5. If voltage is present, the detector tip will light up red, the voltage warning signal will also light up red, and a rapid signal will sound.
6. For safety, check all three phase conductors (L1, L2, L3) for the presence of voltage.
7. If the acoustic signal is weak or the battery lamp is not as bright as it should be, replace the batteries.
8. Please note that even if a visual signal is not displayed, voltage may still be present. Differences in the design of the connection socket or the nature of the insulation can affect functionality. Voltage cannot be detected behind panels and metal covers.
9. After use, turn off the device by pressing the ON/OFF button.
10. Clean the device with a damp cloth and do not use cleaning agents, scouring agents, or solvents. Remove the batteries before storing the device for longer periods.
Please refer to the complete instruction manual for more detailed information and safety precautions.
Add New Comment