User Manual Q&AAnswer
Apr 08, 2025 - 05:45 AM
To set up the Denver GCO-610 4 in 1 Gaming Combo with wired keyboard, follow these steps:
1. Connect the keyboard: Simply plug the USB cable of the keyboard into your PC's USB port. The keyboard is Plug and Play, so it should be automatically detected by your computer. If the keyboard is not detected, make sure to check your PC's keyboard settings.
2. Toggle LED Backlight: The Scroll Lock key on the keyboard can be used to toggle the LED backlight on or off. This feature is only available for PC users.
3. Adjust the headset: Adjust the headset for a snug and comfortable fit. Plug the 3.5mm cable into your controller or mobile device to use the headset for audio. If you want to light up the LEDs on the headset, plug the USB cable into any powered USB port.
4. Use the boom microphone: Flip down the boom microphone on the headset for clear communication during gaming or voice chats.
5. Connect the gaming mouse: The gaming mouse is also Plug and Play. Simply plug the USB cable into your PC's USB port. If the mouse is not detected, check your PC's settings.
6. Clean the mouse sensor: It's important to keep the mouse sensor clean for optimal performance. If you notice your cursor jumping around or freezing randomly, it might be due to dust or dirt on the sensor. Clean the sensor by pointing it to a clean surface and gently wiping away any particles of dust or dirt. Avoid looking directly into the light of the mouse sensor during cleaning.
Please refer to the user manual for more detailed instructions and safety information. Remember to keep the product out of the reach of children and pets, and avoid exposing it to heat, water, moisture, and direct sunlight.
Add New Comment