User Manual Q&AAnswer
Apr 07, 2025 - 12:01 PM
To convert the THOR KITCHEN LRG3601U/LRG3601ULP 36 Inch Gas Range from natural gas to LP gas, you will need the Liquid Propane Gas Conversion Kit (LPKLRG3601U), which is not included with the product. Here are the steps to convert the range:
1. Ensure that the gas supply to the range is turned off and the range is unplugged from the electrical outlet.
2. Remove the grates, burner caps, and burner bases from the cooktop.
3. Locate the conversion orifices included in the conversion kit.
4. Replace the natural gas orifices with the LP gas orifices for each burner. Refer to the instruction manual for the specific orifice sizes and locations.
5. Replace the natural gas orifice on the broil burner with the LP gas orifice included in the kit.
6. Reassemble the burner bases, burner caps, and grates on the cooktop.
7. Adjust the air shutters on each burner according to the instructions in the manual to ensure proper combustion.
8. Test the range by turning on the gas supply and checking for any gas leaks. Use a soapy water solution to check for bubbles, which indicate a leak. If you detect a leak, turn off the gas supply immediately and tighten the connections.
9. Once the conversion is complete and there are no gas leaks, plug in the range and test each burner and the oven to ensure they are functioning properly.
Please note that converting the range from natural gas to LP gas should be done by a qualified professional or a licensed gas technician to ensure safety and proper installation. Always refer to the instruction manual for detailed instructions and safety precautions.
Add New Comment