User Manual Q&AAnswer
Apr 07, 2025 - 11:58 AM
To set up the VIVE Mars CamTrack system, follow these steps:
1. Base Station Setup:
- Refer to the Base Station Setup section in the user manual or visit www.vive.com/mars/support/bs for detailed instructions on setting up the base stations.
- Make sure you have two base stations and connect them to power using the provided AC adapters (B1).
- Use the channel changing pin (B2) to set the base stations to different channels if needed.
2. VIVE Mars CamTrack Setup:
- Connect the Mars device to your computer or network router using the 5-m LAN cable (C1).
- Visit www.vive.com/mars/setup for instructions on connecting the Mars device to the virtual production software.
- Follow the provided steps to establish the connection between the Mars device and the virtual production software.
3. Camera Calibration:
- For camera calibration, you will need to download the camera calibration tool from www.vive.com/mars/cct.
- Install the camera calibration tool on your computer and follow the instructions provided to calibrate the cameras for accurate tracking.
Please note that the items included in the package may vary depending on your country or region. Additionally, if you require tracking with a third VIVE Tracker, it needs to be purchased separately.
For more detailed instructions and troubleshooting, refer to the documentation (D) provided with the VIVE Mars CamTrack system.
Add New Comment