User Manual Q&AAnswer
Apr 07, 2025 - 11:56 AM
To operate the air jets and adjust the speed on the Laurel Mountain PARKER 21 60 X 32 Inch Skirted Acrylic Air Bath, please follow these steps:
1. Make sure the air bath is properly installed according to the Owner's Manual.
2. Fill the air bath with water to the desired level, ensuring that it does not exceed the water depth to overflow of 14 3/4".
3. Turn on the dedicated GFCI power supply for the air bath.
4. To activate the air jets, locate the control panel on the air bath. It should be located near the edge of the bath.
5. Press the power button on the control panel to turn on the air bath. The air jets will start operating at the default speed.
6. To adjust the speed of the air jets, use the speed control buttons on the control panel. These buttons should be labeled with "+" and "-" symbols to increase or decrease the speed.
7. Experiment with different speeds to find the one that suits your preference. The variable speed blower allows you to customize the intensity of the air jets.
8. The air bath also includes Wave & Pulse Modes. To activate these modes, locate the corresponding buttons on the control panel and press them. The Wave Mode creates a gentle wave-like motion, while the Pulse Mode provides a pulsating massage sensation.
9. Additionally, the air bath features Chromatherapy, which involves the use of colored lights to enhance relaxation. To activate Chromatherapy, locate the Chromatherapy button on the control panel and press it. The lights will cycle through different colors.
Please refer to the Laurel Mountain PARKER 21 60 X 32 Inch Skirted Acrylic Air Bath Instruction Manual for more detailed instructions and safety precautions.
Add New Comment