How do I install the REHAU 24V 10A 240W Switching Mode Power Supply? (REHAU Switching Mode Power Supply User Guide)

Answer

manuals.plus

Apr 07, 2025 - 11:18 AM

The installation process for the REHAU 24V 10A 240W Switching Mode Power Supply involves following the safety instructions and guidelines provided in the user manual. Here is a step-by-step guide:

1. Ensure that the electrical installation follows the applicable national standards and guidelines, as well as any specific requirements of your local energy supplier. These instructions are intended for use by a qualified person holding an official certificate in the electrician or electronics engineer profession.

2. Before starting the installation, read the instructions thoroughly to familiarize yourself with the process.

3. Connect the power supply to the final power source only after completing the installation.

4. For wall installation, follow the instructions provided in the manual. Make sure to disconnect from the mains and secure all components of the system before opening. Disconnect external voltages at the relay contacts and secure them against unintended activation. Always check for the absence of voltage.

5. For DIN rail installation, refer to the diagrams and instructions in the manual. Take necessary precautions to ensure safety and proper installation.

6. The manual provides information on electrical terminations, including solid cable and multiple stranded cable connections. Follow the instructions and diagrams provided for the specific type of cable you are using.

7. The manual also includes information on various components and their connections, such as analog inputs, analog outputs, digital inputs, SYSBUS, DIP switch settings, and relays. Refer to the diagrams and instructions to correctly connect these components.

8. Additional information and support can be found on the REHAU website at www.rehau.com/neasmart2.

Please note that this answer is based on the information provided in the user manual. It is important to carefully read and follow the instructions in the manual for safe and proper installation of the REHAU 24V 10A 240W Switching Mode Power Supply.